All Interior welds ground to a smooth 150 grit sanitary finish
Tank shell and cooling jackets are designed to operate at 14.9 PSI
Sidewall and bottom dimpled cooling zones, Chloride-free insulation
Brite/Serving tanks are designed with 20% headspace
Interior tank shell is 2b finish stainless steel
Exterior is #4 finish stainless steel
Tank legs have adjustable foot pads drilled for floor anchors (unless seismic calculations determine otherwise)
Side mounted manway
Sight tube assembly with volume/calibration strips & low point drain
Drain extension tube and hanger
Removable 360° rotating CIP spray ball assembly with downtube
Top mounted VPRV
Shell mounted sample port with sample valve
Shell mounted carbonation port (carbonation stone not included)
Shell mounted temperature sensor well (RTD not included)
(4) sanitary butterfly valves

Note: Some features may vary by size.