Spent Grain Silos

April 25, 2017

We manufacture stainless steel spent grain silos for the craft brewing industry. Sized up to 2000 bbls, these vessels make handling your spent grain a lot more efficient and easier with a lot less mess. Email us today for you quote! parts@marksdmw.com 

#AmericanMadeTanksforAmericanMadeBeer #AmericanMadeTanks #AmericanBeer #MarksTanks #USABeer

We here at MDMW has been helping the growing Cider industry with stainless steel fermentation and bottling tanks for several years. Our in-house Engineering Department can help customize your tank design to meet your specific facility and process needs. 

Get started with Marks Design & Metalworks here.

Semi-Automated CIP Skid

April 21, 2017

Check out our new semi-automated Clean in Place (CIP) skid.The system features the following: 

Food and beverage grade 316 stainless steel construction
Produced from USA Manufactured Stainless Steel Sheet Metal
All Interior welds with product contact ground to a smooth 180 grit sanitary finish
One insulated 90 gallon process vessel with heating elements
One insulated 90 gallon makeup/return tank with heating elements
Pre-return micron filtration
In-line heating elements
Two, dual stage high pressure pumps
Three chemical dosing valves (Caustic, Acid, Sanitizer)
Conductivity sensors to maintain proper CIP chemical levels
In-tank and in-line sight glasses to inspect fluid clarity/viability
Fully programmable for chemical levels, pressure delivery, flow rate and time for each cycle
Touch screen user interface
Maximum delivery pressure: 60 PSI
Maximum flow rate: 59 GPM
208-230V 3 phase power standard (other options available)

 email parts@marksdmw.com for more information. 

Kombucha Tanks for Sale

April 20, 2017

We here at MDMW has been helping the growing Kombucha industry with stainless steel fermentation and bottling tanks for several years. Our in-house Engineering Department can help customize your tank design to meet your specific facility and process needs. 

Get started with Marks Design & Metalworks here.

Marks Design & Metalworks will be attending the 2017 Craft Brewers Conference and BrewExpo America in Washington, DC from April 10-13, 2017. Stop by Booth #261 to learn more about how MDMW can design, engineer and build quality USA-Made stainless steel brewery equipment and tanks for your craft beer project. 

Get started with Marks Design & Metalworks here.

Marks Design and Metalworks offers an array of stainless steel tanks and can also custom design and fabricate tanks around your specific brewing needs.

Marks Design & Metalworks is a forward thinking partner, with the experience and know-how to take your brewery to the next level. 

Our design team will work with you to develop a customized brewery concept that incorporates your existing equipment and facility.  We select and integrate the most advanced brewhouses technology available.  We build your new brewhouses from the ground up here in the USA and take pride that we use USA steel suppliers.

Marks Design & Metalworks provides individual planning and flexible custom designs for your brewhouse and the stainless steel tanks that will be a big part of them.

You will benefit from your experience with our company. We specify the necessary infrastructure, provide you the layout plans and assist your preparations with your professionals.

Get started with Marks Design & Metalworks here.

Stainless steel tanks and brewey expansion assistance - Marks Design & Metalworks

#MarksTanks #AmericanMadeTanks #StainlessSteelTanks

Marks Design & Metalworks can provide your brewery with the stainless steel brite tanks you need from 5 to 1500 barrels.

We’re glad to make your single wall serving tanks and your jacketed Brite Beer Tanks.

A Marks Design & Metalworks Brite Tank features:

  • Food and beverage grade 304/304L stainless steel construction                                                  
  • Produced from USA Manufactured Stainless Steel Sheet Metal                                                                             
  • Brite/Serving tanks are designed with 20% headspace unless requested                
  • Interior tank shell is 12ga with a 2b finish stainless                                                    
  • The stainless steel tank has a high R-value with 1 1/2" thick layer of insulation       
  • Cooling zones located on the sidewall and dish of stainless steel tank

See more details and start the customization process for your new brite tank here.

Stainless steel brite tanks by Marks Design & Metalworks

#BriteTanks #BriteBeerTanks #StainlessSteelTanks

Marks Design and Metalworks is proud of the work we do; design and create stainless steel tanks for breweries across the United States.

We have been in business for a long time, but couldn't do it alone. Marks Design & Metalworks are proud members of:

Marks Design and Metalworks-The American Way-Fabricating Brewery tanks and providing Brewery Parts-American made tanks for American made beer-Brewers Association   Marks Design and Metalworks-The American Way-Fabricating Brewery tanks and providing Brewery Parts-American made tanks for American made beer-Northwest Cider Association   Marks Design and Metalworks-The American Way-Fabricating Brewery tanks and providing Brewery Parts-American made tanks for American made beer-Oregon Craft Beer   Marks Design and Metalworks-The American Way-Fabricating Brewery tanks and providing Brewery Parts-American made tanks for American made beer-SanDiego Brewers Guild  

Click to learn more about the stainless steel tanks we create, and how to get one for your own brewery.

#MarksTanks #AmericanMadeTanks #StainlessSteelTanks

Marks Design & Metalworks can provide you with all the stainless steel parts your brewery needs to keep the beer flowing in your facility.

Check out some of the parts we stock at our warehouse in Vancouver, WA. And if you need a part you don't see here, just let us know.

Marks Design & Metalworks has a custom small parts fabrication shop on site and can build you all the one-off stainless steel parts you desire.

Stainless steel parts for breweries by Marks Design and Metalworks

#MarksTanks #AmericanMadeTanks #StainlessSteelTanks

Marks Design and Metalworks would love to be a part of your craft brewing process as you start your new brewery.

Marks Design & Metalworks' stainless steel tanks are custom-designed and made to fit each brewery's specific needs.

So whether you are starting from scratch, or even ready to expand your current brewery setup, we can help.

Contact Marks Design & Metalworks to get started.

Marks Design and Metalworks - stainless steel tanks for US breweries

#MarksTanks #AmericanMadeTanks #StainlessSteelTanks

1 2 3 6 Next »